Cabling is the part of the network nobody looks at, until a desk keeps dropping off the network or a new access point will not power up.
What each category supports
| Category | Speed | Notes |
|---|---|---|
| Cat5e | 1 Gbps to 100 m | Fine for most desks today if it was installed and terminated properly. |
| Cat6 | 1 Gbps to 100 m; 10 Gbps to about 55 m | Our usual minimum for new office runs. |
| Cat6A | 10 Gbps to 100 m | Best for Wi-Fi 6E/7 access points, high-power PoE and long-term upgrades. |
Signs the cabling is the problem
- A computer shows a 100 Mbps link instead of 1 Gbps (often a damaged or badly terminated cable).
- Devices drop off and reconnect at random, especially when someone moves a chair or a cable.
- New PoE access points or cameras will not power on reliably at the end of long runs.
- Nobody knows which wall jack goes to which patch panel port.
- Cables were run by "a guy" with no labels and no testing.
Why certification matters
A cable that lights up a link is not necessarily a good cable. A certification tester measures every run against the standard and produces a report, so problems are found before the wall is closed, not after.
We install, label and certify structured cabling across the Valley: see cabling & low voltage.