"The Wi-Fi is bad" is usually not about internet speed. It is about where the access points are, how they are configured and how many devices share them.
Placement beats power
- Mount access points on the ceiling, in the middle of where people work, not in a closet, behind a TV or on top of a filing cabinet.
- Several modest access points beat one powerful one. Phones and laptops transmit weakly; the access point has to be close enough to hear them.
- Mind the building. Concrete, brick, metal studs, elevators and mirrors block signal. Warehouses and shops with metal buildings need careful planning.
- Wire every access point. Wireless mesh between access points halves the speed at each hop. Run a cable with PoE (power over Ethernet) to each one.
Configuration that matters
- Use 5 GHz and 6 GHz (Wi-Fi 6E/7) for staff; 2.4 GHz is crowded and slow, and is best kept for older devices.
- In busy offices, use narrower channel widths (20 or 40 MHz on 5 GHz) so neighbouring access points do not interfere.
- Let a controller manage channels and power instead of every access point shouting at full power.
Separate networks (VLANs)
Guests, staff, cameras, phones and smart devices should not share one flat network. Separate VLANs mean a visitor's infected laptop or a cheap smart TV cannot reach your file server, and you can prioritise voice traffic so calls stay clear.
We design and install UniFi Wi-Fi and networks with a proper site survey: see network, Wi-Fi & firewalls.